Mimaki CF3-1610 FLATBED CUTTER 2018

Design:
zaun

Homepage Rio suryadi store

Mimaki CF3-1610 FLATBED CUTTER 2018

Mimaki CF3-1610 FLATBED CUTTER 2018
Mimaki CF3-1610 FLATBED CUTTER 2018 Mimaki CF3-1610 FLATBED CUTTER 2018 Mimaki CF3-1610 FLATBED CUTTER 2018
Product Code: CF3-1610 2017
Availability: In Stock
Price: $18,500.00
Ex Tax: $18,500.00
Qty:  
   - OR -   

MIMAKI CF3-1610 FLATBED CUTTER

The CF3 series large format flatbed cutting plotters can handle an extensive range of applications up to 5 cm thick. It incorporates three exhangeable head types (router, reciprocating, or tangential head) and innovative cutting technology. For an effective print and cut solution, CF3 series can be combined with Mimaki’s UV curable flatbed printers, the JF series.
 
Supports both small and large size media up to 1.6m x 3.1m (63″ x 122″). Even difficult acrylic or aluminum composite panels can be cut with consistently high accuracy. User exchangeable cutting heads to suit a wide range of conditions widen your possibilities greatly.
 
The Cf3 series incorporates three exchangeable head types (router head, tangential head or reciprocating head) which allow for cutting a wide range of materials. Switching heads can be done relatively quick. Other tools, such as  swivel cutter, pen tool, and creasing tool, are also available.
 
 
M head(router)
 
The M head is used exclusively for router cutting. With a high-speed spindle, rigid materials such as acrylic or aluminum composite panels can be cut easily, even up to 50mm in thickness.
 
The cut depth control function enables multiple cuts for especially thick materials.
 
 
CF3-1631 Effective cut area/ 
1,600 x 3,100mm (63" x 122")
CF3-1610 Effective cut area/ 
1,600 x 1,000mm (63" x 39.3")

M head(router)

The M head is used exclusively for router cutting. With a high-speed spindle, rigid materials such as acrylic or aluminum composite panels can be cut easily, even up to 50mm in thickness. 
The cut depth control function enables multiple cuts for especially thick materials.

Spindle speed: 60,000rpm 
Tool chuck: collet type 
Maximum tool diameter: 6mm (0.24") 
Main materials: rigid materials such as acrylic and 
aluminum composite panels 
Set tool: endmill

 

R1 head(reciprocating cutter)

Thick materials up to 20mm (0.78") can be cut with the reciprocating cutter. The R1 head is equipped with a material-holding unit, which prevents cut materials from lifting. The cutting head is suitable for cutting corrugated boards and foam materials.

Maximum reciprocating speed: 
approximately 10,000 strokes/min 
Stroke: 1mm *dependent on the cutter and holder used 
Maximum cut depth: 20mm *dependent on the cutter and 
holder used 
Main materials: cardboard, corrugated board, foam material 
Set tool: swivel cutter/pen, reciprocating cutter creasing tool, 
high-pressure tangential cutter

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Tags:

Copyright © 2014 RIO SURYADI PRINTER CORP, All Rights Reserved.