New Roland DWX 50 Milling Machine New

Design:
zaun

Homepage Rio suryadi store

New Roland DWX 50 Milling Machine New

New Roland DWX 50 Milling Machine New
Product Code: DWX 50
Availability: In Stock
Price: $5,990.00
Ex Tax: $5,990.00
Qty:  
   - OR -   

Roland DWX 50 Milling Machine New

SPECIFICATION

DWX-50 
Cuttable material  Zirconia (pre-sintered), modeling wax, PMMA
Loadable workpiece shape Disc (with levels) External diameter (level section): 98 mm to 100 mm
External diameter (body section): 95 mm
Height (level section): 10 mm
Height (body section): 12 to 26 mm
Disc (without levels) External diameter: 98 to 100 mm
Height: 10 to 14 mm, 16 to 20 mm
Block  Width x Depth: 38 x 76 mm, Height: 16 or 22 mm
Operating speed X and Y axes: 6 to 3600 mm/min. 
Z axis: 6 to 1800 mm/min. 
Spindle motor  Brushless DC motor, maximum 100W
Spindle speed  6.000 to 30.000 rpm
Rotary axis travel angle  A: +/-360 degrees, B: +/-20 degrees
Number of tools housed  5
Attachable tool  Shank diameter: 4 mm, Length: 40 to 55 mm
Compatible compressed air  0.02 to 0.2 MPa
Interface  USB (compliant with Universal Serial Bus Specification Revision 1.1)
Control command set  RML-1, NC code
Power requirements Voltage and frequency: AC100 to 120 V/220 to 240 V ±10%, 50/60 Hz (overvoltage category II, IEC 60664-1)
Required power capacity: 2.8 A (100 to 120 V)/1.2 A (220 to 240 V)
Power consumption  Approx. 275W
Operating noise During operation: 70 dB (A) or less (when not cutting)
During standby: 45 dB (A) or less
External dimensions  Width x Depth x Height: 656 x 656 x 557 mm 
Weight 50 kg 
Installation Environment Operating environment: Temperature of 5 to 40 degrees Celsius, 35 to 80% relative humidity (no condensation)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Included items Power cord, USB cable, Setup and Maintenance Guide, Roland Software Package CD-ROM, Detection pin, Hexagonal screwdriver, Hexagonal wrench, Cap (S and L), Clamp for block workpiece (A and B), Tool holder, Tool positioner, Dust collection hose, Regulator, Dust tray etc.
System Requirements for USB Connection
Computer  Model preinstalled with the 32- or 64-bit edition of Windows 7, Vista, XP, or upgraded computer originally preinstalled with Windows XP or later.
USB cable  Use the included USB cable.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2014 RIO SURYADI PRINTER CORP, All Rights Reserved.